(479) 522-1907

UL 508A listed shop

In the shop

Real cabinets and programs from the Van Buren shop. Panels, wiring, and operator screens.

Open control cabinet with PLC I/O modules, blue and orange field wiring, and wire duct.
HMI overview of condenser fans, pumps, and discharge pressure.
Shop staff wiring large open control cabinets on a plant wall.
Industrial HMI on the bench showing compressors, condensers, and pumps.
PanelView with mechanical-room overview, Reset, and emergency stop.
Stainless cabinet packed with PowerFlex drives, breakers, and field wiring.
Open stainless enclosure with VFDs, motor starters, and dressed Ethernet.
HMI line layout with start and stop and a VFD popup.
Dark-mode HMI packout layout with start and stop and PLC connected.
Tall stainless cabinet with circuit breakers, VFDs, and a thick blue wire bundle.
PanelView showing pump and fan pressure setpoints.
Stainless-mounted HMI conveyor layout with start and stop.
Door-mounted HMI with bay fan controls, Reset pushbutton, and emergency stop.
Control cabinet interior with DIN-rail modules and field wiring.
Allen-Bradley PLC racks with bundled red and white field wiring.
PanelView HMI showing a circular process overview with status blocks.
Open stainless enclosure with power supplies, starters, and terminal blocks.
Two-door gray control cabinet on the shop floor with a door-mounted HMI.
Laptop HMI showing compressors, receivers, and evaporator fans.
Wall-mounted stainless enclosure with a PanelView control screen.
Large gray control enclosure with PLC modules, motor starters, and terminal blocks.
Row of stainless operator enclosures on the shop floor with cable coils.
Plant-overview HMI map with area status and alarm readouts.
Stainless process equipment with a side-mounted control box.
Allen-Bradley ControlLogix processor and Ethernet module inside a cabinet.
Monochrome HMI startup screen with start, stop, and belt-speed options.
Laptop showing a process-control overview in the shop.
Stainless control box interior with breakers, terminals, and clean wiring.
Workstation monitor with a tank-and-pump process graphic.
Open gray cabinet with wiring channels and mounted components.
HMI zone screen with a tank graphic and operator buttons.
Tall control cabinet interior with stacked DIN rails and modules.
HMI in a stainless bezel showing a process overview.
Open stainless enclosure on the shop bench with door pushbuttons and drives.
Tall gray cabinet with a centered HMI and red emergency stop.
HMI showing parallel conveyor lanes and status indicators.
Wall-mounted HMI with a conveyor layout graphic.
Wide HMI listing evaporator units and status fields.
Allen-Bradley remote PLC rack with green status lights and blue wiring.
HMI alarm and status list on a dark background.
Open stainless cabinet with organized wiring and terminal blocks.
Open control cabinet with relays, breakers, and dense wiring.
Stainless washdown operator station with conveyor selectors and emergency stop.
Floor-standing open cabinet with rows of power components.
Small open electrical box with breakers and terminal blocks.
Wide open cabinet with a controller and rows of terminals.
Laptop groov View screen for south and north condensers.
HMI process graphic with chiller and process pumps.
Tall stainless cabinet with a PanelView, Reset, and emergency stop.
Narrow panel section with terminal blocks and I/O modules.
HMI for bay fans with status readouts.
Tall open cabinet packed with PLC modules, terminals, and wiring.
HMI process flow with equipment icons and flow paths.
Open cabinet with a compact controller, relays, and labeled wiring.
Stainless operator pedestal with HMI, selector, and emergency stop.
HMI status blocks for engine units.
Top-down view into a stainless box with an assembly and cable coil.
Stainless control box face with selector switches and emergency stop.
Stainless enclosure with pneumatic regulator and electrical modules.
Shop staff working inside a large open control cabinet.
Wall-mounted open panel with PLC, breakers, and door pushbuttons.
HMI conveyor layout screen on a stainless door.
Desktop HMI for fans, sensors, and setpoints.
HMI engine-room screen with tank levels and fan status.
Stainless panel surface with a large red emergency stop.
Panel face with a small HMI, illuminated button, and emergency stop.
Stainless box interior with PLC and pneumatic solenoids.
HMI scale controls with Auto, Manual, Start, and Stop.
Large cabinet interior with Allen-Bradley PLC, power supplies, and terminals.
Small enclosure with a compact PLC, relay, and terminal strips.
HMI pump status screen.
Narrow cabinet packed with relays and circuit breakers.
Main control HMI with tanks and pumps.
Open stainless box with two rows of components and wiring.
Stainless door with a small HMI and red emergency stop.
Wide SCADA-style dashboard with status icons and levels.
Allen-Bradley PLC rack with I/O modules and Ethernet cables.
Small open control box with PLC, breakers, and clean wiring.
Cabinet interior with I/O racks, power supplies, relays, and drives.
HMI setpoints screen with large numeric fields.
Vertical HMI menu of control buttons on a blue background.
Partially populated cabinet with mounting rails and wire duct.
HMI tank screen with bar graphs for chemical pumps.
Stainless faceplate on the shop floor with an HMI cutout and emergency stop.
Open stainless cabinet with VFDs, PLC rack, and wire duct.
Open panel in the shop with a programming laptop connected to the hardware.
Control cabinet interior with DIN-rail hardware, wire duct, and a cooling fan.
HMI with Auto/Manual, temperature status, and menu controls.